Zinc Cut Wire Shot
Product Description:
We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes.
Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non ferrous components. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
Deburring and deflashing of aluminium and zinc castings and die-castings. Removal of sand from sand castings. Removal of parting lines and stains from non ferrous castings. Removal of water wrinkle from aluminium die castings and providing a luster satin type finish. Zinc Cut Wire provides temporary corrosion protection to ferrous parts blasted with it. A very thin layer, up to 1.3μm thick is deposited onto the surface of the part.
Specification:
Item | Zinc Cut Wire Shot |
Chemical Component | Zn≥99%-99.5% |
Microhardness | 45～50HV |
Tensile Strength | 90～120Mpa |
Durability | 6000Times |
Metallographic structure | α |
Density | 7.1g/cm3 |
Bulk density | 4.1g/cm3 |
Applications:
Zinc wire cut shot are widely used in metal die castings, precision castings, hardware tools, machinery manufacturing, automotive parts, instruments, pumps and other industries to descale, deburr, eliminate surface defects, remove internal stress, etc Matte finish, leveling, strengthening, rust prevention before spraying and other surface treatments.
Zinc Cut Wire Shot
Product Description:
We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes.
Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non ferrous components. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
Deburring and deflashing of aluminium and zinc castings and die-castings. Removal of sand from sand castings. Removal of parting lines and stains from non ferrous castings. Removal of water wrinkle from aluminium die castings and providing a luster satin type finish. Zinc Cut Wire provides temporary corrosion protection to ferrous parts blasted with it. A very thin layer, up to 1.3μm thick is deposited onto the surface of the part.
Specification:
Item | Zinc Cut Wire Shot |
Chemical Component | Zn≥99%-99.5% |
Microhardness | 45～50HV |
Tensile Strength | 90～120Mpa |
Durability | 6000Times |
Metallographic structure | α |
Density | 7.1g/cm3 |
Bulk density | 4.1g/cm3 |
Applications:
Zinc wire cut shot are widely used in metal die castings, precision castings, hardware tools, machinery manufacturing, automotive parts, instruments, pumps and other industries to descale, deburr, eliminate surface defects, remove internal stress, etc Matte finish, leveling, strengthening, rust prevention before spraying and other surface treatments.
